A.P.S. Metals, Inc.   
(216) 383-5710   
info@apsmetals.com   

 
Model R-M10
Roll Bender
Manually Powered

  • Hardened Rolls for standard profiles included with machine.
    2-rolls driven manually

  • Manual Adjustment

  • 2" Flat, 1 1/4" tube capacity

  • Includes standard rolls
 
Optional Accessories
  • Special rolls
  • Storage cabinet
     
SPECIFICATIONS    
Shaft Diameter: 1.378"  
Upper Roll Diameter: 3.858"  
Lower Roll Diameters: 4.646"  

   
CAPACITIES    
Flat Bar Hard Way: 1-3/16" x 3/8" @ 10" Radius Min.  
Flat Bar Easy Way: 2.0" x 3/8" @ 8" Radius Min.  
Solid Square or Round: 7/8" @ 10" Radius Min.  
Angle Iron Leg In/Out: 1-3/8" x 1-3/8"x 3/16" @ 16" Radius Min.  
Tubing Round: 2" x 14 ga. @ 16" Radius Min.  
Tubing Square: 1-1/8" x 1-1/8" x 14 ga @ 18" Radius Min.  
Tubing Rectangle: 1.5" x 7/8" x 14 ga. @ 20" Radius Min.  
Schedule 10 Pipe: 1" @ 14" Radius Min  

© 2008 A.P.S. Metals, Inc.

Home | About Us | Sitemap

Call Us at (216) 383-5710   

 

Home | About | Flaring Machines & End Finishers | Tube Benders | Roll Benders | Notchers & Welding Positioners
Sheet Metal Notchers | Cold Saws | Band Saws | Brakes | Shears | Plate Rolls | Sitemap