A.P.S.
Metals, Inc.
(216)
383-5710
info@apsmetals.com
Programmable Bender
-
Bend Material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
-
The OCS (Operator Control Station) allows for quick, accurate repeatability of multiple or single bends. Unit can store up to 20 programs with 10 bends per program. The OCS unit is extremely easy to program.
-
Extra heavy duty design normally seen on larger models of bending machines means more value for the investment.
-
Quick release counter die system allows for maximum efficiencies for high production runs.
-
Maximum bend is 180 degrees (plus spring back up to 206 degrees).
-
The model 350 tubing bender has a maximum bend speed of 6 seconds at 180 degrees.
-
This tubing bender has a larger CLR than almost all other bending equipment on the market. The maximum CLR is 24 inch.
-
Power is 240 V, 3 phase, 60 Hertz, 30 amp
-
Weight is approximately 1200 lbs (solid steel construction)
-
Similar to other RMD programmable tubing benders, the model 350 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
-
2 1/2" Schedule 40 Pipe Capacity
-
3" Square and more
-
24" CLR maximum
-
Programmable, portable and easy to operate
-
Quick release counter die system
-
Optional positioning table for multi-bend/multi-plane parts
-
220V, 3 phase
-
Optional touch screen holds 140 programs
UB 350 - Universal Bender
- Bends to 360 degrees and more
- Bends to the right or left
- Accepts other manufacturers’ tooling
- Universal bend plate
- Easy to program and operate\
- Holds 140 programs, 10 bends each
- 220V 3 phase
- 3" Tube Capacity
- Quick Change tooling
- 1.5 degree bends
- Mandrel extractor/positioner
- Max 3" stainless steel tubing with .065 wall