A.P.S.
Metals, Inc.
(216)
383-5710
info@apsmetals.com
Programmable Rotary Draw Bender
-
Portable and easy to operate
-
Variable speed
-
220v, single phase and 3 phase
-
Bend material: Round or square tubing, pipe, flat stock, angle iron, or solid rod. Bends 0 - 180 degrees
-
Programmable electric tubing bender, optional OCS programmer stores multiple programs
-
Maximum capacity is 2" Schedule 40 pipe, 3" tube, 2" Square
-
Like most RMD tubing benders, the model 300 utilizes a portable cart with wheels for easy mobilization around the job site or production floor.
-
To program a bend, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head will automatically stop at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends.
-
Optional OCS (operator control station) programming unit can store multiple programs. Each program can store 10 different bend angles. The model 300-S with OCS was designed to be understood easily for ease of operation.
-
Like all RMD tubing benders, bends can be advanced after stopping machine, saving on material costs during set-up.
-
Non-proprietary center die spindle allows for custom tooling applications.
-
This tubing bender is supplied with an AC variable speed motor drive with built in speed potentiometer.
-
Similar to other RMD programmable tube benders, the model 300 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.