A.P.S. Metals, Inc.
(216) 383-5710
info@apsmetals.com

Flaring Machines & End Finishers
 
Model 50 Model 20
Power Flare Machine


The Olsen Power Flare machine flares brass, copper, aluminum, steel and stainless steel tubing for pneumatic, hydraulic and fluid systems. The unit is self contained whether as a bench unite or with a floor stand. The Model 50 Power Flare is simple to operate.

Watch Video of Model 50 In Operation

  • Single flares 1/8" to 2" OD at a 37.5 or 45 degree flare
  • Copper, Brass, Steel and Stainless Steel Round Tubing
  • Available with squaring and deburring attachment
  • Metric tooling available
  • Easy operation
  • Bench mount or floor stand available.
Double Flare & Swaging Machine


The Model 20 Double Flare and Swaging machine will consistently produce uniform double flares in aluminum and copper tubing, light wall steel tubing and double walled weld type tubing.

Watch Video of Model 20 In Operation

  • Capacity: Soft copper and aluminum tubing from 3/16" to 5/8"OD
  • Light wall annealed steel tube from 3/16" to 3/8"OD
  • Manual clamp, Dual palm button ram control, and manual index
  • Double Flare, swage, bead, tulip bead and upset single flare.

Model 50-P DBF Power Flare
All the precision of the Model 50 with Built-in deburring tools.
Model 20 Heavy Duty Double Flare
  • Capacity: Soft copper and aluminum tubing from 3/16" to 3/4"OD
  • Light wall annealed steel tube from 3/16" to 5/8"OD
  • Manual clamp, Dual palm button ram control, and manual index
  • Double Flare, swage, bead, tulip bead and upset single flare.
 


flaring machine
Model 232P
Model 10
Power Flaring, Bending, Squaring, Deburring

Automatic Clamping and Manual Movement


Beading Capacity: 1/4" to 1 -1/2" O.D. Tubing
Flaring Capacity: 1/8" to 2" O.D. Tubing
Flaring Angles: 37 and 45 degrees
AN, JIC, SAE, ASME, MS
  • Squaring/Deburring Capability: 1/8" to 2" O.D. Tubing
  • Electric Motor: 1/2 H.P. 115/230-60
  • Machine Dimensions: 18-1/2"W, 23-1/2"d, 13-5/8"H
  • Dimensions (with cabinet): 20"W, 23-1/2"D, 42"H
  • Weight (machine): 168lbs
FLARING: The base machine, flaring dies and a flaring head are necessary to flare.

BEADING: The base machine, beading head, beading die and beader are necessary to bead.

SQUARING AND DEBURRING: The base machine, squaring-deburring head and appropriate flaring die are necessary.
Deburring Machine

Watch Video of Model 10 in Operation


The Model 10 deburring machine is a two (2) spindle bench mount deburring machine which provides a fast, easy way to remove the generated by various tube cut-off operations. With two ball bearing mounted spindles, an inside deburring tool is mounted on one spindle and an outside deburring tool is mounted on the second spindle.

Tubing from 3/16" O.D. to 3/4" O.D. can be deburred without having to change set-ups or tools.The unit is powered by 1/3 H.P., 115/220 Volt, 60 cycle, single phase electric motor. Included is an OFF-ON toggle switch with overload protection and four foot long, three wire grounded type electric cord and plug. Two adjustable "V" type stock guides, drive belt and tool guard, one I.D. and one O.D. deburring tool.

The unit is supplied completely assembled and ready for mounting to your bench.  
 
 
 
2017 A.P.S. Metals, Inc. Call Us at (216) 383-5710